ZyXEL Communications XS1930 Series - Page 37

Chapter 3 Hardware Panels
XS1930 Series User’s Guide
37
LNK/ACT
1-8 (XS1930-
12HP)
Blue On The link to a 10 Gbps Ethernet network is up.
Blinking The Switch is transmitting/receiving to/from a 10 Gbps Ethernet network.
Purple On The link to a 5 Gbps Ethernet network is up.
Blinking The Switch is transmitting/receiving to/from a 5 Gbps Ethernet network.
Sky Blue On The link to a 2.5 Gbps Ethernet network is up.
Blinking The Switch is transmitting/receiving to/from a 2.5 Gbps Ethernet network.
Green On The link to a 1000 Mbps Ethernet network is up.
Blinking The Switch is transmitting/receiving to/from a 1000 Mbps Ethernet network.
Amber On The link to a 100 Mbps Ethernet network is up.
Blinking The Switch is transmitting/receiving to/from a 100 Mbps Ethernet network.
Off The link to an Ethernet network is down.
PoE Mode
1-8 (XS1930-
12HP)
Blue On Power supplied to all PoE Ethernet ports meets the IEEE 802.3bt standard.
Green On Power supplied to all PoE Ethernet ports meets the IEEE 802.3at standard.
Yellow On Power supplied to all PoE Ethernet ports meets the IEEE 802.3af standard.
Off There is no power supplied.
1G/10G SFP+ Slots
LNK/ACT
9-10 (XS1930-10)
11-12 (XS1930-
12HP)
Green On The port has a successful 1000 Mbps connection.
Blinking The port is transmitting or receiving data at 1000 Mbps.
Blue On The port has a successful 10 Gbps connection.
Blinking The port is transmitting or receiving data at 10 Gbps.
Off This link is disconnected.
Table 5 LED Descriptions (continued)
LED COLOR STATUS DESCRIPTION