Chapter 4 The Web Configurator
XS1930 Series User’s Guide
51
After clicking Next, the Link Aggregation screen appears.
Figure 34 Wizard > Basic > Step 3 Link Aggregation
Each field is described in the following table.
After clicking Next, the Summary screen appears.
Next Click Next to show the next screen.
Cancel Click Cancel to exit this screen without saving.
Table 11 Wizard > Basic > Step 3 Link Aggregation
LABEL DESCRIPTION
Link Aggregation
T1-T5 Click the arrows to add or delete icons located on the left to desired preference.
Select Static if the ports are configured as static members of a trunk group.
Select LACP if the ports are configured to join a trunk group via LACP.
Previous Click Previous to show the previous screen.
Next Click Next to show the next screen.
Cancel Click Cancel to exit this screen without saving.
Table 10 Wizard > Basic > Step 2 Password
LABEL DESCRIPTION
To Next Page
Loading...
