3D Systems DMP Flex 350 Original Instructions

3D Systems, Inc.
21
p/n: 15-D99, rev. C
This area is needed for stairs. It is only needed
on one side of the machine. The customer may
determine which side.
Minimum room size: 2.3 x 2.7 x 3.3 m (90.5 x 106.3 x 130 in)
Minimum room door size: 0.9 x 2.3 m (35 x 90.5 in)
4.5 

3D Systems DMP Flex 350 Specifications

General

Brand	3D Systems
Model	DMP Flex 350
Category	3D Printers
Language	English