3D Systems DMP Flex 350 - Introduction to DMP Flex 350; Safety Precautions Overview

3D Systems, Inc.
i
p/n 15-D99, rev C
TABLE OF CONTENTS
 INTRODUCTION 
1.1 Limitations of Warranty and Liability 1
1.2 Intended Use 1
1.2.1 Inert Gas Requirement 1
1.2.2 Oxygen Limits 1
1.3 Copyright 1
1.4 Related Documentation 2
1.5 Safety Precautions 2
1.6 Prepare For Installation 2
 TYPES OF INSTALLATION 
2.1 Compact Setup 3
2.2 Split Setup 4
 EQUIPMENT AND PACKAGING 
3.1 Equipment 5
3.2 Crated Weights and Dimensions 5
3.3 Storage Requirements 5
3.3.1 Recommended Storage Conditions 5
3.4 Noise Emission 5
3.4.1 Measurement Device 5
3.4.2 Measurement Positions 6
3.4.3 Measurement Results 6
3.5 DMP Flex 350 Printer (process chamber & electrical cabinet) 7
3.6 RPM Cart 8
3.7 Vacuum Pump 9
3.8 Blower 10
3.9 Process Filter (with cart) 11
3.10 Chiller 12
3.11 External Sieving Station (optional) 14
3.12 Customer Supplied Equipment 15
3.12.1 Main Power Supply Cable 15
3.12.2 Vacuum Cleaner 15
3.12.3 Floor Cleaning Machine 15
3.12.4 Oxygen Monitor 15
3.12.5 Dust Extraction System 15
3.12.6 Retractable Dust Extraction Arm 16
3.12.7 Safety Step Ladder / High Step Ladder 16
3.12.8 Pure Ethanol 16
3.12.9 Cooling Fluid Additives 16