3D Systems DMP Flex 350 - Recommended Workspace

3D Systems, Inc.
22
p/n: 15-D99, rev. C
900 mm
(35.5”)
4.6 Recommended Workspace
The previous pages provide the physical dimensions of the system and the minimum room size needed to accommodate
the DMP Flex 350 system. When planning the amount of space that will be dedicated to the DMP Flex 350, 3D Systems
recommends that you take into consideration the additional pieces of equipment that are needed during daily operation. The


dimensions are provided since your particular installation may vary.
Room oxygen
monitor

extinguisher
Cooling unit
Workbench
and tool
storage
Ruwac
vacuum
cleaner
Additional
RPM