3D Systems, Inc.
14
p/n: 15-D99, rev. C
3.11 External Sieving Station (optional)
Supplied by: 3D Systems
Installed by: 3D Systems
The sieving station will be used to sieve the metal powders. It’s a standalone piece which does not require any connection to the
DMP Flex 350.
A. Physical Dimensions
• Weight: 320 kg (705.48 lbs)
• Dimensions (W x D x H): 890 x 1275 x 2220 mm (35 x 50.2 x 87.4 in)
B. Electrical - supplied from facility power
• Operating voltage: 1-phase 230 V AC
• Frequency: 50 Hz / 60 Hz
• Main circuit breaker: 16 A
• Short circuit current rating: 10 kA
• Typical power consumption: 1.1 kW
• 1 phase + PE electrical cable. To be supplied by customer
C. Argon Gas
• Supply pressure - 5 bar (15 psi)
• Quality: 4.8 or better
• Connection - G 1/8 female BSP thread
• Lines from Argon supply to control panel - supplied by customer
•
D. Compressed Air
• Supply pressure - 6 bar (87 psi)
• Oil free, quality class 1 according to ISO 8573-1:2010.
• Connection - G 1/8 female BSP thread
• Lines from compressed air supply to sieving station - Supplied by
customer
• Consumption: very low
E. Cooling Water - N/A
F. Network Connection - N/A
G. Noise Emissions
• 65 dB
To Next Page
Loading...
Need help?
General
