3D Systems, Inc.
37
p/n: 15-D99, rev. C
Utilities and Equipment
Requirements
Atmosphere requirements completed
Refer to chapter 6
Electrical requirements completed
3 phase + N + GND electrical cable available (to be supplied
by customer)
400 VAC, 50/60 Hz, 3-phase power available
Measured values:________ VAC, ________ Hz, _______Phase
Transformer installed (if required)
Inert gas requirements completed
Compressed air requirements completed
Network Requirements
Computer and network requirements completed
Refer to chapter 7
3D connect requirements acknowledged (optional service)
Lifting Equipment
operator on site at the time of installation.
Refer to chapter 8
Comments
Signature
TRAVEL DUE TO FALSE OR INCORRECT INFORMATION ON THIS FORM.
Sales order number (S.O.)
Printer serial number
To Next Page
Loading...
