Stpr~
Senes
II
Weather
Mapping
Systems
2.5. WX-PA Test Plug
WX-PA I
nstruction
Manual
The WX-PA test plug (3M
PIN
78-8060-5821-6) is for use with the Output Verification Mode.
The 16 test points on the test plug may be viewed with
a scope to determine the operational
integrity of the WX-PA outputs.
2.6.
Charger
The WX-PA is powered by a sealed, rechargeable 12V lead-acid battery for portable
operation. The battery charger supplied (3M PIN 78-8060-5797-8) is a calculator style battery
charger, which has sufficient output to power the WX-PA without draining the battery.
SEPT 88
Page
1-7