3M Stormscope Series 2 - Testing Installed Units

Stormscop8
Series II Weather Mappmg Systems
5. Testing Installed Units
WX-PA Instruction Manual
All Storrf1scope ™ systems must be tested after they have been installed to ensure proper
operation of boththe system and the installation. Figure 5.1 illustrates the connections for
this test.
V Dj0jSYSTEM UNDER TEST
SEPT 88
WX-PA ANTENNA
WX-PA ANTENNA CABLE
~DDDDDDDD $
00000000
00000000
<il 00000000
o 0 0 0 0 0
$ $
Aircraft Test Setup
Figure 5.1
OPTIONAL AIRFRAME GROUND
Page 1-23