3M Stormscope Series 2 User Manual

StormscopEi
Series II Weather Mappmg Systems
4.8.2. Checklist Title Selection
WX-PA Instruction Manual
Select Checklist Entry from the Mode Menu. The WX-PA display will appear as in Figure 4.6.
If any checklists have previously been entered, the titles will be displayed on lines 2, 3 and 4.
If checklists have not yet been entered, all titles will be blank.
Checklist Titles
lIErvlergenc.
'
::I
2 Taxi /RI.,fn-Up
3 Takeoff
Press ENTER to select
14 Clil'lb
5 Cruise
6 Landit-.g
Checklist Title Menu
Figure 4.6
Generally, checklist 1 should be used for an emergency checklist, as it will appear first on the
Series II system checklist mode, making it easier to access during an emergency. The order
of the remaining five checklists is not important, except that they must be filled in order. In
other words, if there is no title for checklist 2, checklist 3 may not be selected.
To select the checklist title to edit, position the blinking cursors on the desired checklist with
the arrow keys, and press
ENTR.
4.8.3. Checklist Title Edit
After selecting the checklist, the display will appear as in Figure 4.7. The checklist number
and checklist title (if any) will be displayed on line 2, with a blinking block cursor on the first
character. In addition to the Editor keys described in section 4.7.1, the following keys are
valid in the Checklist Title Edit Mode.
SEPT 88
Page 1-19

3M Stormscope Series 2 Specifications

General

Brand	3M
Model	Stormscope Series 2
Category	Measuring Instruments
Language	English