Important User Information
Warning!
LCD
If the liquid crystal display breaks, avoid injury by not allowing the l iquid crystal
to come into contact with eyes, skin or mouth. Prevent the liquid crystal from
leaking out of the broken glass.
2.1.5 Preventing malfunction
• Never place the equipment in close proximity of electric motors, welding
equipment or other devices generating strong (electro) magnetic fields.
Exposure to strong (electro) magnetic fields may cause malfunction and
corrupt the communication.
• Moving the equipment rapidly between warm and cold temperatures
may cause condensation (water droplets) to form on its internal and
external surfaces. Water droplets may cause malfunction of the equipment
and corrupt or end communication or damage the equipment. When
condensation is noticed, stop using the equipment. Switch off the phone,
remove the battery and unplug the mains adapter from the power outlet.
Wait until the moisture evaporates from the equipment before putting it in
operation again.
• Avoid accidental drop of the phone. Use the clip, security clip or carrying
case specified for carrying purposes of the phone.
• Avoid squeezing the phone between furniture and your body when carrying
the phone in your pocket or attached to clothing.
2.2 Intrinsic Safety
The DT390 cordless phone is not specified as intrinsically safe, so do not use it
in areas with a danger of explosion.
2.3 IPEI Code
Your phone has an International Portable part Equipment Identity (IPEI)
code. This code is unique for each phone, and it is needed for your system
administrator to enable network subscription of your phone. It is also needed if
the user has entered the wrong phone lock code three times.
To look up the IPEI code, do the following:
• Enter *#06# when phone is in idle mode.
9
1424-EN LZT 103 091 Uen A1 2008-10-27
To Next Page
Loading...
