DT390
2. Select In charger.
3. Select Redirect.
4. Press Select to save the setting.
Detach from system while charging
When the cordless telephone is placed in the charger the phone can be
detached from the system but still be switched on and charging.
1. Enter Settings.
2. Select In charger.
3. Select Switch off.
4. Press Select to save the setting
Deactivate the charging mode
1. Enter Settings.
2. Select In charger.
3. Select No action.
4. Press Select to save the setting.
18.7 Network Settings
Subscribe a New PBX System
The cordless telephone can subscribe up to eight different systems. To
subscribe a new system, the Park (Portable A ccess Right Key) and Ac
(Authentication code) related to the system you are going to log on to are
needed.
Contact your system administrator for more information.
The IPEI code is a unique code which has been assigned to the cordless
telephone.
1. Enter System name and press Next.
2. Enter the PARK code.
3. Enter the AC code and press Next.
The information text Protection on? is displayed.
4. Select Yes/No, if the new system is to be protected or not.
5. Press OK.
82
1424-EN LZT 103 091 Uen A1 2008-10-27
To Next Page
Loading...
