EasyManua.ls Logo

Aastra DT390 - 16 Security; Activating Automatic Key Lock; Activating Manual Key Lock; Activating Phone Lock

Aastra DT390
115 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Security
16 Security
16.1 Activating Automatic Key Lock
The keypad can be set to lock 20 seconds after it was last used. When in
idle mode a locked keypad is indicated by
. To activate the automatic key
lock, do the following:
1. Enter Settings in the menu.
2. Select Locks and press Select.
3. Select Automatic K ey lock and press Select.
4. Mark On,pressSelect, and then press Back.
16.2 Activating Manual Key Lock
It is recommended to always have the automatic lock on, but it is possible to
manually lock and unlock the keypad as well. To lock the keypad manually:
•Press
and then Soft key Lock.
The indicates that the keypad is locked.
Note: To unlock the keypad, press
and then Soft key Yes.
16.3 Activating Phone Lock
Activating Phone lock will protect the phone from unauthorized use. When
this function is activated, the PIN code has to be entered at power on. When
activating Phone lock the PIN code that must be entered. The PIN code is by
default (0000) but it can be changed to any 4-8 digit code. To activate the
phone lock, do the following:
1. Enter Settings from the menu.
2. Select Locks.
3. Select Phone lock.
4. Select Auto phone lock.
5. Select On or On in charger.
6. Enter PIN code, press OK.
7. Press Back to save the settings.
71
1424-EN LZT 103 091 Uen A1 2008-10-27

Table of Contents

Other manuals for Aastra DT390

Related product manuals