DT390
Note: The password can also be changed without accessing the mailbox by
using the procedure Section 12.8 on page 59.
Change the password through the telephone
1. Press #*7 2* to select a new password.
2. Enter your present password.
The default password is 0000.
3. Press *
4. Enter your new password.
5. Press # and wait for the v erification tone.
6. Press
to finish the procedure.
12.9 Dictaphone Function
If you want to record and retrieve personal voice messages (memos), you
can use the Dictaphone function. A dictaphone message is treated as a
normal message. For information on how to retrieve dictaphone messages,
see Section 12.4 on page 56.
Record message
To start recording:
1. Press *5 8#
.
2. Wait for the verification tone. “RECORDING” is displayed.
3. Record your message.
The maximum recording time is four minutes and 15 seconds. Select one
of the options below:
4. Press * to play-back.
OR
Press 9 and speak to re-record.
OR
Press
to stop the recording and save the message.
60
1424-EN LZT 103 091 Uen A1 2008-10-27
To Next Page
Loading...
