Incoming Calls
5 Incoming Calls
The flashing LED, accompanied by a ring signal or a vibrating handset indicates
an incoming call. The ring type can tell if the call is an internal, external or
callback call. Both ring signal and vibrator can be disabled. The calling party's
number, name, or both, is displayed. The name is displayed if the calling party's
phone number is stored in the local or central phonebook.
When a headset is connected to the handset, the answering button on the
headset can be used to answer the call. Other answering methods can also
be set in the Settings menu.
The answering methods are: Automatically and Loudspeaking. When
Automatically is enabled, an incoming call to a handset placed in the Desktop
Charger will be answered automatically when the handset is lifted out of the
charger. The answer behavior is enabled/disabled in the Settings menu.
5.1 Answering Calls
The ringing type tells you whether the call is an internal, external or callback
call and the display indicates the number of the incoming call.
If the number is stored in the integrated phonebook, the associated name is
shown instead.
Press
to answer. If you do not answer the call, the number is stored as a
missed call in the Call info/Missed calls.
Note: Calls can be answered at any time, w hether you are programming,
keying in a number, and so on.
End the call
Press
.
Mute ringing sound temporarily
If the phone rings at an inconvenient moment:
Press
to suppress the ringing. All alert signals, except the vibrator, will
silence for this specific call.
Change answering mode
27
1424-EN LZT 103 091 Uen A1 2008-10-27
To Next Page
Loading...
