DT390
3. Wait for the verification tone.
Answer calls
It is possible to have group hunting information in the display. If you require a
different display layout, please contact your system administrator.
Answer group hunting calls in the normal way.
14.1.2 Log out
To log out from one hunt group:
1. Press #2 8*
2. Enter the hunt group code.
Please ask your system administrator for the configured number.
3. Press #
4. Wait for the verification tone.
Note: If you are logged in to more than one hunt group and log out from one of
them, the display will show the following text: PBX Group(s) logged out.
To log out from all hunt groups:
1. Press #2 8**#
2. Enter the hunt group code.
Please ask your system administrator for the configured number.
3. Press #
.
4. Wait for the verification tone.
14.2 Group Call-pick-up
In a Pick-up group, any member can answer any individual call to group
members. You answer a call to the group by dialling a special answering
number. Please ask your system administrator for the configured number.
Enter the group call pick-up code and press
.
64
1424-EN LZT 103 091 Uen A1 2008-10-27
To Next Page
Loading...
