During Calls
7.4 Loudspeaking (Handsfree)
An incoming call can be connected with loudspeaking function active by
pressing the left Soft key. During a call, a press on the left Soft key activates
the loudspeaking function. Press the left Soft key again to turn it off.
7.5 Mute Microphone
To mute the microphone during an ongoing conversation, do the following:
1. Press
.
2. The muted microphone
is shown and low beeps indicate a silenced
microphone. This means that the other part in an ongoing call with you
will not here you.
3. Press
again to turn the microphone on.
Note: It is advised to use this feature instead of putting a call on hold. A call
on hold can be diverted to your operator, directly or after some time.
7.6 Call Waiting
If you hear the Call Waiting tone during an ongoing conversation, another
person is trying to contact you. To terminate the ongoing call and answer the
waiting call:
1. Press
to finish the ongoing call.
The waiting call is signalled on your phone.
2. Press
to answer the new call.
Note: The Call Waiting function might be blocked for use on your extension
(programmed by your system administrator).
391424-EN LZT 103 091 Uen A1 2008-10-27
To Next Page
Loading...
