DT390
cordless telephone without any clip on. Use the clip to
attach the phone to a belt o r similar.
Battery The battery is a rechargeable Li-Lon battery, placed
under a battery cover. The battery is fully charged within
four hours. The battery can be charged separately with
a special battery charger.
3.2 Display Information
The icons and text in the display indicate functions and settings available to
the user. The display gives visual feedback on all actions performed, and also
textual warnings, see Page 16. The owner ID can manually be set by the user.
Note: If a name is available it is displayed instead of, or together with, the
number.
13:00
Contactcs
select
Back
Figure 3 Example of a display configuration in standby mode
Status bar
The top row is used for icons giving the user information for signal strength,
missed call, new message, time and battery status. This row is always visible.
Header bar
The next row displays the current date, headset connection, phone lock and
so on.
Active area
The next rows are used for information such as the name of the system to
which the cordless telephone is connected to. A user identity provided from the
system and/or an Owner ID can also be displayed if configured in the Settings
menu. This is also a the area for pop up text for example, missed c alls or to
confirm an action.
Soft key bar
The bottom row is used for soft keys. There are three soft keys, located just
beneath the display and the functions of each soft key is indicated by text in
the display just above the keys, see Page 17. The functions for the soft keys
can not be changed.
16
1424-EN LZT 103 091 Uen A1 2008-10-27
To Next Page
Loading...
