Installation
002
Advanced Basic
Figure 11 Desktop chargers
The charger is delivered with a plug-in power supply and is connected into an
ordinary wall socket.
Note: Only use the charger within the temperature range of 5 - 40º C.
Advanced charger
To use the advanced desktop charger for software download and synchronizing
parameters, the charger must be connected to a PC with Portable Device
Manager (PDM) software installed. For a description of PDM, see Section
21.8 on page 93.
The charger is connected to a PC through the USB or one of the network
connectors, see Figure 12 on page 91. When connecting the charger with a
PC through one of the network connectors the charger acts as a switch, which
makes it possible to connect the other c onnector to the LAN.
Figure 12 Network and USB connectors
Note: Network and USB connectors are used to connect the desktop charger
to a P C running the PDM (not for charging).
21.5.2 Rack Charger
Note: See also the separate Installation G uide, supplied together with your
phone.
The charging rack is used for charging handsets, to communicate with the
system, and for software download. The built in power supply can charge up to
six cordless telephones.
21.5.3 Battery Pack Charger
The battery charger is used for charging up to six spare batteries.
91
1424-EN LZT 103 091 Uen A1 2008-10-27
To Next Page
Loading...
