Installing MX-ONE
• Install the two fixing irons (A) between the feet of the cabinet with the bar
(B), two screws (H), and two washers (G), Figure 19 on page 33 .
• Align the holes in the fixing irons over the anchoring holes in the floor.
• Tighten the two screws (H) to a torque of 80 Nm.
4.2.7.1 Anchoring the Cabinet on a Concrete Floor
Figure 20 Installing the Expander Screw
34
6/1531-ASP 113 01 Uen J2 2008-07-17
To Next Page
Loading...
