Installing MX-ONE
Warning!
Before working on any equipment, be aware of the hazards involved with the
electrical circuits and be familiar with the standard practices for preventing
accidents.
4.6.1 Installing the AC/DC Unit Shelves 115-230 V
Figure 33 Installing AC/DC Unit Shelves 115-230 V
First, install shelves for the AC/DC unit. (The shelves come with the 115 - 230
V AC/DC unit.) Perform the following steps:
1. Mount four captive nuts (A) (see Section 4.4 on page 41 ) according to the
number positions shown, see Figure 37. It will be difficult to mount these
if the shelves have been installed.
2. Use the screws (C) supplied with the AC/DC unit to fasten the shelves (B)
to the captive nuts in the cabinet, see Figure 36.
4.6.2 Installing the AC/DC Unit 115-230 V
This unit delivers 4 x 850 W at 230 V and 4 x 600 W at 115 V.
48
6/1531-ASP 113 01 Uen J2 2008-07-17
To Next Page
Loading...