4.4 Metadata insert
Metadata insertion can be moved anywhere in the picture with the «up»,
«down», «left» and «right» keys.
• AatonCode
• Battery voltage
• VITC line & parity
• Lens Data
• Film status
• Software/hardware
• AatonCode
Time, Date, Camera ID. The positionning of these three ‘words’ currently
is directly accessible from the VHR Menu (Main Menu).
• Battery voltage
The higher of the two battery voltage is displayed. When the low battery
alert level has been reached, the battery voltage characters start blinking.
• VITC line & parity (not yet functional)
PAL VITC lines can be inserted from 10 to 23 (line 19 is common practice).
For NTSC, 13 to 19.
Ask your editing staff the line # they prefer to work with.
ODD or EVEN parity interleave: ODD is common practice.
• Lens Data
As transmitted from the Cooke i/lens system.
To Next Page
Loading...