ABB 2600T Series - Analog Input 1 setting

2600T SERIES | PRESSURE TRANSMITTERS | OI/266/FF-EN REV. E
45
Hovewer all the 3 AIx_CHANNEL can be switched to receive in input up to different 4 PRTB variables:
AI CHANNEL Variables PRTB_Variable
0 Uninitialized None
1 Pressure Process Value PRIMARY_VALUE
2 Sensor Temperature SECONDARY_VALUE
3 Static Pressure TERTIARY_VALUE
4 Scaled Process Value QUATERNARY_VALUE
Factory settings
Transmitters are calibrated at the factory to the customer‘s specified measuring range. The calibrated
range and tag number are provided on the name plate. If this data has not been specified, the
transmitter will be delivered with the following configuration:
Process info Parameter Factory setting
Node Address 
TAG PD_TAG 
  
  
Calibration Unit PRTB_PRIMARY_VALUE_RANGE_UNIT Kpa
Transfer function PTRB_QUATERNARY_VALUE_LIN_TYPE Linear
Display Mode HMI_MODE One Line
Display Variable  
Analog Input 1 setting
Channel  
Damping  
  
  
Calibration Unit  Kpa
  
  
Output Scale Unit  Kpa
Linearization  Direct
Critical Limit Low  
Advisory Limit Low 
Advisory Limit High  
Critical Limit High 
Alarm Hysteresis  