ABB 2600T Series - Page 71

2600T SERIES | PRESSURE TRANSMITTERS | OI/266/FF-EN REV. E
71
Idx Parameter Description / Range / Selections / Notes
 BLOCK_OBJ
In the Block Object data structure, there are different items describing the block characteristics. Execution period,
Number of parameters in the block, the DD Revision, Profile Revision, View Objects characteristics and so on
 ST_REV
The revision level of the Static data associated with the Function Block. The revision level is incremented each time a
static parameter value (S – under Storage) in the block is changed.
 TAG_DESC The user description of the intended application of the block
 STRATEGY The strategy field can be used to identify grouping of blocks. This data is not checked or processed by the block.
 ALERT_KEY The identification number of the plant unit. This information may be used in the host for sorting alarms, etc.
 MODE_BLK
TARGET AUTO / OOS The selectable modes by the operator.
ACTUAL The mode the block is currently in.
PERMITTED AUTO / OOS The allowed modes the operator can select as Target
NORMAL AUTO The common mode for the Actual.
 BLOCK_ERR
This parameter reflects the error status associated with the hardware or software components associated with a
block. It is a bit string, so that multiple errors may be shown.
 The MODE_BLK_ACTUAL = Out of Service.
 UPDATE_EVT This alert is generated by any change to the static data
 BLOCK_ALM
The block alarm is used for all configuration, hardware, and connection failure or system problems in the block. The
cause of the alert is entered in the sub-code field. The first alert to become active will set the Active Status in the
status parameter. As soon as the Unreported status is cleared by the alert reporting task, another block alert may be
reported without clearing the Active Status, if the sub-code has changed.
 TRANSDUCER_DIRECTORY Directory that specifies the number and starting indices of the transducers in the transducer block
 TRANSDUCER_TYPE Identifies the transducer type.
 TRANSDUCER_TYPE_VERSION 
of the transducer specification on which the transducer is based, and BB is a revision number assigned and
controlled by the manufacturer of the device.
 XD_ERROR Transducer block error sub-code
 COLLECTION_DIRECTORY Directory that specifies the number, starting indices, and the DD items IDs of the data collections in each transducer
within a tb
 HMI_CONTRAST 
 HMI_LANGUAGE
0: English (default)
 German
 French
 Spanish
 Italian
 HMI_MODE
 One Line
6: One Line with Bargraph (default)
 Two Lines
 Two Lines with Bargraph
 HMI_SW_REV
 Not Installed
xxx Display SW Revision
 HMI_LIN_TYPE
0: Linear (default) 
In this case the PRTB_PRIMARY_VALUE is calculated with the selected HMI_
LIN_TYPE and the result ready to be scaled with the HMI_VARIABLE_RANGE.
 Square root
 
 
 Cylindrical lying container
 Spherical container
 Bidirectional Flow