ABB 2600T Series - HMI Transducer Block (HMITB); Description

70
2600T SERIES | PRESSURE TRANSMITTERS | OI/266/FF-EN REV. E
HMI Transducer Block (HMITB)
Overview
14.1. Overview
The display transducer block is an independent block dedicated to the management of the local display and the local operations
via push buttons.
Block Diagram
Description
The HMI Transducer Block contains all the parameters allowing the display configuration. Refer to the dedicated section of this
manual.
HMI_SELECTION
HMI_VARIABLE_1
HMI_VARIABLE_2
HMI_VARIABLE_3
HMI_VARIABLE_4
HMI_SEQUENCE
Transfer
Function
HMI_LIN_TYPE
Output Scale
HMI_VARIABLE_RANGE_100%
HMI_VARIABLE_RANGE_0%
HMI_VARIABLE_RANGE_UNIT
HMI_General
HMI_LANGUAGE
HMI_CONTRAST
From Function Bllcck
Outputs
HMI Selection
HMI_VARIABLE_1
HMI_VARIABLE_2
HMI_VARIABLE_3
HMI_VARIABLE_4
HMI_Setting
HMI_MODE
HMI_LINE_1
HMI_LINE_2
HMI_BARGRAPH
HMI_SEQUENCE
TEMPERATURE
CAL_VALUE
PRIMARY_VARIABLE
STATIC_PRESSURE
QUATERNARY_VALUE