ABB 266CSH - Diagnosis; Error Messages; Calling Up the Error Description

76 266CRH / 266CRT, 266CSH / 266CST MULTIVARIABLE PRESSURE TRANSMITTER | OI/266CXX/MODBUS-EN REV. A
9 Diagnosis / error messages
Calling up the error description
Additional details about the error that has occurred can be called
up on the information level.
Process dis
p
la
y
Electronics
1. Use to switch to the information level (Operator Menu).
O
p
erator Menu
Diagnostic
Back Select
2. Use / to select the submenu ‘Diagnostic’.
3. Confirm the selection with .
Electronics
- F123.321 -
Brief description
Information
Back Exit
The error message is shown on the display according to priority.
The first line shows the area in which the error has occurred.
The second line shows the unique error number. It is made up of
the priority (Fxxx) and the error position (.xxx)
The next lines show a brief description of the error and
information on how to remedy it.
You absolutely need to scroll the display further to read the error
message in more detail.
Note
For a detailed description of the error messages and
information on troubleshooting, see the following pages.
Change from two to one column