104 Maintenance
Replacing the cabinet fan
WARNING! Obey the instructions in chapter Safety instructions. If you ignore
them, injury or death, or damage to the equipment can occur.
1. Stop the drive and do the steps in section Precautions before electrical work on page
16 before you start the work.
2. Undo the mounting screws of the grille.
3. Loosen the four mounting screws of the fan mounting plate.
4. Lift the mounting plate off.
5. Unplug the power supply quick connector.
6. Disconnect the fan capacitor wires.
7. Install the new fan in reverse order.
2
3
Combi screw M6×16
T25 (4 pcs)
Combi screw
M6×16 T25 (4 pcs)
Combi screw M6×16
T25 (3 pcs)
5
6
To Next Page
Loading...
