Mechanical installation 47
Attaching methods
Attach the cabinet to the floor from the front and rear edge by using clamps delivered with
the drive, or bolt the cabinet to the floor through the holes inside if they are accessible.
Alternative 1 – Clamping
Alternative 2 – Using the holes inside the cabinet
1. Insert the clamps into the twin slots along the front
and rear edges of the cabinet frame body and attach
them to the floor with a bolt. The recommended
maximum distance between the clamps in the front
edge is 800 mm (31.5”).
2. If floor mounting from back is not possible, attach the
cabinet at the top to wall with L-brackets (not included
in the delivery) using the lifting lug attaching holes.
1. Attach the cabinet to the floor through the bottom
attaching holes with M10 to M12 (3/8” to 1/2”) bolts.
The recommended maximum distance between the
front edge attaching points is 800 mm (31.5”).
2. If the back attaching holes are not accessible, attach
the cabinet at the top to wall with L-brackets (not
included in the delivery) using the lifting lug attaching
holes.
To Next Page
Loading...
