ABB ACS580-07-0495A-4 - Lifting the Cabinet; Moving the Cabinet after Unpacking; Laying the Cabinet on Its Back

Mechanical installation 43
 Lifting the cabinet
Lift the drive cabinet using its lifting lugs. Maximum allowed lifting angle of IP42 (UL Type 1
Filtered) cabinets is 20°. Allowed minimum height of lifting slings of IP54 (UL Type 12)
cabinets is 2 meters (6.5 ft).
 Moving the cabinet after unpacking
Move drive cabinet carefully in the upright position. Avoid tilting. The center of gravity of
the cabinet is high.
Laying the cabinet on its back
If the cabinet needs to be laid on its back, support it from below beside the cubicle seams.
1) cabinet back panel; 2) support.
IP54IP42
Max. 20°
UL Type 1 Filtered UL Type 12
1
2222
1