36 Operation principle and hardware description
Filters
E205 du/dt filter (page 33)
Line options
F250 Line contactor
Heaters and auxiliary control voltage
G300 Cabinet heater (external supply). See page 33.
Lights
G327 Ready pilot light, white
G328 Run pilot light, green
G329 Fault pilot light, red
Cabling
H351 Top entry of cables
H353 Top exit of cables
H358 Cable conduit entry. See page 34.
Control panel
J429 ACS-AP-W Assistant control panel with Bluetooth interface
Fieldbus adapters
K451 FDNA-01 DeviceNet™ adapter module
K454 FPBA-01 PROFIBUS DP adapter module
K457 FCAN-01 CANopen adapter module
K458 FSCA-01 RS-485 adapter module
K462 FCNA-01 ControlNet™ adapter module
K469 FECA EtherCat adapter module
K470 FEPL EtherPOWERLINK adapter module
K473 FENA-11 Ethernet adapter module for EtherNet/IP™, Modbus TCP and PROFINET IO protocols
K475 FENA-21 Ethernet adapter module for EtherNet/IP™, Modbus TCP and PROFINET IO protocols,
2-port
I/O extensions and feedback interfaces
L501 CMOD-01 external 24 V DC/AC and digital I/O extension module (two relay outputs and one
digital output)
L504 Additional I/O terminal block
L512 CHDI-01 115/230 V digital input extension module (six digital inputs and two relay outputs)
L523 CMOD-02 external 24 V and isolated PTC interface
L537 CPTC-02 ATEX-certified thermistor protection module
Specialties
P904 Extended warranty
P912 Seaworthy packing
P929 Container packing
Safety functions
Q951 Emergency stop of Category 0 with opening the main contactor or breaker
Q971 ATEX-certified Safe disconnection function, EX II (2) GD. Requires +L537.
Printed documentation (manuals, dimensional drawings, circuit diagrams and manual language).
Note: The delivered manual set may include manuals in English if the translation is not available.
R700 English
R701 German
R702 Italian
Code Description
To Next Page
Loading...
