AO2000 CONTINUOUS GAS ANALYZERS | OI/AO2000-EN REV. B 75
Analyzer data sheet
Contents of the analyzer data sheet
For the central unit and each analyzer module the analyzer data sheet con-
tains the following information:
• Order number (A-No.)
• Part number (P-No.)
• Production number (F-No.)
• Date of manufacture
• Power supply (voltage, frequency, power consumption)
• Sample components and measuring ranges
• Production numbers of the installed modules.
Additionally, the maintenance work or any modifications performed on the
gas analyzer can be documented on the analyzer data sheet.
Storage of the analyzer data sheet
The analyzer data sheet is located in a sleeve which is affixed
• on the left-hand side panel inside the 19-inch housing (model AO2020)
and
• on the inside of the door of the wall-mounting case (model AO2040).
NOTES
The analyzer data sheet should be kept with the gas analyzer so that it is
always available for reference.
During start-up be sure to note the data in the analyzer data sheet. These
data can differ from the general information contained in this operator’s
manual.
To Next Page
Loading...
