40
AWT420 | UNIVERSAL 4-WIRE, DUAL-INPUT TRANSMITTER | OI/AWT420-EN REV. B
… 13 Configuration (Advanced access level)
… Display
Menu
Comment Default
Date & Time Select to set the transmitter’s date, local time and daylight saving start/end times:
Date Format Select the date format required:
•
Date & Time
• HR:MINS:SEC.
Daylight Saving Select to set the daylight saving parameters.
DS Region Select the geographical region to base the daylight saving hours on:
•
•
•
•
than Europe or USA.
Note. The DS Start Time/Occurrence/Day/Month and Time menus (below) are displayed only
when Custom is selected.
Off
DS Start Hour
DS Start Occurrence Select the day within the month to start daylight saving.
For example, to set daylight saving to start on the second
Sunday of the selected month, select Second..
Last
Last
DS Start Day Select the day of the month on which daylight saving is to start.
Note. The DS Start Occurrence parameter must be valid within the
month for the selected day.
Sunday
Sunday
DS Start Month Select the month on which daylight saving is to start.
Note. The DS Start Occurrence parameter must be valid within the
month for the selected day.
Sunday
Sunday
DS End Hour
DS End Occurrence Select the day within the month to end daylight saving.
For example, to set daylight saving to end on the second
Sunday of the selected month, select Second.
Last
Last
DS End Day Select the day of the month on which daylight saving is to end.
Note. The DS End Occurrence parameter must be valid within the
month for the selected day.
Sunday
Sunday
DS End Month Select the day of the month on which daylight saving is to end.
Note. The DS End Occurrence parameter must be valid within the
month for the selected day.
Sunday
Sunday
Brightness Sets the display brightness.
To Next Page
Loading...
