84 AWT420 | UNIVERSAL 4-WIRE, DUAL-INPUT TRANSMITTER | OI/AWT420-EN REV. B
…16 Troubleshooting
…Diagnostic messages
…AWT420 transmitter diagnostics
NAMUR
icon
Diagnostic
message
Cause Recovery action
Clean (n) in
progress
S(n):
Write Error
Error writing configuration to
sensor/sensor module.
Repeat previous configuration change.
If Sensor Write Error persists, cycle power to the transmitter.
Check the Sensor Setup and correct if necessary.
If Sensor Write Error persists, ensure that the sensor and the
transmitter are compatible by upgrading the software on both via
the bootloader.
Check the Sensor Setup.
If Sensor Write Error persists, contact local service organization.
Alarm Active
is active.
Check the process and make any adjustments required.
If the alarm condition has passed but the diagnostic remains active,
acknowledge the alarm via the Operator menu.
uploading the files.
uploading the files.
To Next Page
Loading...
