ABB COM600 Station Automation Series - Protection Activation Information (ACT); Analog Set Point (APC)

Protection activation information (ACT)3.4.8.3.
Table 3.4.8.3-1 Configurable ACT properties for OPC client
DescriptionValue or Value range/ DefaultProperty/ Para-
meter
Basic
Common data class according to IEC
61850.
ACTCommon Data
Class
Addresses
General Index-1 to 65535
Default: -1
General Index
-1 to 65535
Default: -1
Neutral Index
Phase A Index-1 to 65535
Default: -1
Phase A Index
Phase B Index-1 to 65535
Default: -1
Phase B Index
Phase C Index-1 to 65535
Default: -1
Phase C Index
-1 to 65535
Default: -1
Data Class Spe-
cific
Object number for indication.Binary input (1, 2)
Binary output (10)
Default: Binary input (1, 2)
Indication Object
Analog set point (APC)3.4.8.4.
Table 3.4.8.4-1 Configurable APC properties for OPC client
DescriptionValue or Value range/ DefaultProperty/ Para-
meter
Basic
Common data class according to IEC
61850.
APCCommon Data
Class
Addresses
Control index.-1 to 65535
Default: -1
Control Index
31
DNP 3.0
LAN/WAN Master
(OPC) 3.2
COM600 Station Automation Series
1MRS756566
User's Guide