ABB COM600 Station Automation Series - Complex Measured Value (CMV)

DescriptionValue or Value range/
Default
Property/ Parameter
Indication index.-1 to 65535
Default: -1
Indication Index
Data Class Specific
Qualifier for control.Momentary
Latched
Pulsed
Default: Momentary
Control Code Qualifier
Variation for control0 to 65535Control Variation
Specifies using two-step, select-before-operate
method for issuing control request or not.
Direct Operate
Select Before Operate
Default: Direct Operate
Operate
Scale and Unit
Scale to be used with this type.Default: NoneScale
Complex measured value (CMV)3.4.8.7.
Table 3.4.8.7-1 Configurable CMV properties for OPC client
DescriptionValue or Value range/ DefaultProperty/ Para-
meter
Basic
Common data class according to IEC
61850.
CMVCommon Data
Class
Addresses
Indication index.-1 to 65535
Default: -1
Index
Sub-Type
MV sub-typeSimpleSubtype
Data Class Spe-
cific
Object number for indication.Analog input (30, 32)
Analog output (40)
Default: Analog input (30, 32)
Indication Object
Scale and Unit
33
DNP 3.0
LAN/WAN Master
(OPC) 3.2
COM600 Station Automation Series
1MRS756566
User's Guide