In the Strategy drawing, IO blocks can be added up to the total on the configured FLX modules.
Note: If a FLX module is deleted from a FBXi configuration (in CXproᴴᴰ’s Configuration utility) after the Strategy
drawing has been set up, the blocks associated with that FLX’s IO will be ‘greyed out’ to indicate that they
are inactive.
Set the BACnet properties for the new Network, by clicking the BACnet button in the Configuration utility’s
main menu:
Note: If the FBXi needs to communicate with BACnet devices on other IP Subnetworks, enter the IP address of the
BBMD device.
To Next Page
Loading...
