106 DPA 250 S4 50-250 KW OPERATING MANUAL
Xtra VFI status bar screen
Figure 14.3.2-3 below, shows the Xtra VFI status
bar screen which is accessible via Xtra VFI mea-
—
14.3.2-3: Xtra VFI
status bar screen
—
14.3.2-3
surements screen by pressing the icon or via
Home screen by pressing the same icon.
This screen provides a graphical view of the sys-
tem (live) by indicating the actual load applied to
the UPS system (dark green) and the amount of
active and standby modules within the system
(light green and light blue respectively). All indica-
Module selection screen
Figure 14.3.2-4, shows the Modules selection
screen which is accessible via any screen by
—
14.3.2-4: Module
selection screen
pressing the icon .
—
14.3.2-4
This screen allows to enter the sub-menu of any
module within the system simply by pressing one
of the icons. By doing that, the user is accessing
the module-level menus, which gives the possibil-
ity to see status and measurements of the se-
lected module by starting at the Mimic diagram
screen.
To Next Page
Loading...
