ABB DPA 250 S4 - 15.1.1 CS121 Basic

108 DPA 250 S4 50-250 KW OPERATING MANUAL
The small (125x70 mm) External SNMP adapter
comes with following interfaces:
1. RJ-45 connector for 10/100 Base-T
(auto-switchable)
2. Serial Port for configuration (COM2) or
optional ModBus interface.
3. Error/Link LED for UPS status
4. Aux Port
5. DIP Switch
6. Serial Port to the UPS (COM1)
7. DC Supply (9 VDC or 9-36 VDC supply,
depending on model)
The Internal SNMP-Card can be inserted into an
appropriate extension slot of the PMC. This
adapter communicates via the serial port of the
UPS and makes a direct multiple server shut down
possible without additional SNMP management
software.
For detailed information please refer to the Soft-
ware Manual provided with the PMC-Software CD
ROM. RCCMD - Remote Console Command mod-
ule for a multi-server shutdown. This standalone
software module is designed to receive and exe-
cute a command issued by a remote device.
Thanks to RCCMD it is possible to execute a shut-
down in a heterogeneous multi-platform net-
work. The new release RCCMD2 is an application
available for all Operating Systems, analogous to
PMC-Software. Our SNMP Interfaces are compati-
ble with RCCMD.
—
15.1-3: CS141
advanced box
—
15.1-3
—
15.1-4: CS141
advanced slot
—
15.1-4
15.1.1 CS121 basic
For interfacing the UPS with the network without the need for additional sensors or interfaces. Avail-
able in slot and box formats.
Supports the following protocols
SNMP, Modbus TCP,HTTP ModBus TCP, Telnet FPT, SMTP (e-mail).
—
15.1.1-1: CS141 advanced
—
15.1.1-1