17173 SYSTEM DESCRIPTION
The UPS module of the DPA 250 S4 is the core
engine of this modern, high quality UPS. The
module includes all essential parts of a complete
double conversion UPS: Rectifier, inverter,
DC-converter (battery charger), static bypass
switch and back feed protection. Each module
has also its own control logic and small display
—
3.2 DPA 250 S4 M50 UPS Module
for monitoring and management. This allows for
the modules to be completely independent and
act fully redundant with each other. Decentral-
ized paralleling architecture (DPA™) is the most
-
vidual UPS connected in parallel, but in a single
frame.
3.2.1 UPS Module dimensions
Rated power 50kW
Ingress of protection IP20
Weight 66 kg
Dimensions (WxHxD) 706 x 175 x 825
WARNING
DANGER
THE FOLLOWING LABELS ARE PLACED ON THE UPS MODULE:
To Next Page
Loading...
