ABB DPA 250 S4 - 8.2.2 Sea Freight Cases (Wooden Box)

57
8.2.2 Sea freight cases (wooden box)
Perform the following steps to unpack the
UPS equipment from the sea freight package:
1. Use a screwdriver or a pair of
pliers to lift up all the tabs
3. Remove the front wall
2. Remove the lid
4. Remove the other front
wall paying attention
to the two side walls that
could fall
—
8.2.2-1: Sea freight
cases unpacking
sequence
(Wooden box)
—
8.2.2-2: Sea freight
cases unpacking
sequence
(Wooden box)
—
8.2.2-1
—
8.2.2-2
8 PACKING, TRANSPORTATION & STORAGE