EL3000 CONTINUOUS GAS ANALYZERS | OI/EL3000-EN REV. D 165
Handling
The QR code is accessed in the Diagnostic Menu of the gas
analyzer and indicated on the display.
The QR Code Scanner App installed in the mobile device scans
the QR Code that is displayed. The text information that is then
displayed on the mobile device is sent to the local service
contact specified in the “Measurement Care” contract, by email
or other means of transmission.
Alternatively, it is possible to take a photograph of the displayed
QR code and send the photograph to the service contact.
Dynamic QR Code Accessing
Menu Path
‘ Maintenance / Diagnosis / Device Status / Display
QR-Code’
Procedure
1. Select system overview or the required analyzer module.
2. Access the QR code by pressing OK.
3. If necessary, change the resolution of the QR code with .
4. Scan QR code.
5. Return to the menu selection by clicking on .
Recommended QR code scanner apps
ABB recommends using the following QR code scanner apps
(available free of charge for iOS and Android devices):
“my Installed Base" from ABB
”QR Scanner” from Kaspersky
iOS App Store Google Play
To Next Page
Loading...
Need help?
General
