ABB i-bus KNX - Parameter Window E, F, G: Fan (Multi-Level)

ABB i-bus
®
KNX
Commissioning
124 2CDC508134D0202 | FCA/S 1.x.x.1
3.2.3.8 Parameter window E, F, G: Fan (Multi-level)
All settings for the Multi-level fan are made in this parameter window.
Fan type
Options:
Multi-level
One-level
This parameter defines the fan type which is to be controlled.
 Multi-level: Controls a fan with up to three speeds.
 One-level: Controls a fan with one speed.
Limit fan speeds to 2
Options:
No
Yes
The fan speeds can be limited to two here. The following settings are the same as those for a three-speed
fan, except that they apply only to two speeds.
 No: A three-speed fan is controlled.
 Yes: A two-speed fan is controlled via fan speeds 1 and 2. Fan speed 3 is non-functional.