ABB i-bus KNX - Parameter Window E, F, G: Fan (Two-Level)

ABB i-bus
®
KNX
Commissioning
148 2CDC508134D0202 | FCA/S 1.x.x.1
3.2.3.14 Parameter window E, F, G: Fan (Two-level)
All settings for the two-level fan are made in this parameter window.
If you wish to use the device for controlling a two-level fan, set the parameters as follows:
 In the parameter window E, F, G: Fan, select the Multi-level option in the Fan type parameter.
 Select Yes in the Limit fan speeds to 2 parameter.
Now a two-speed fan is controlled via fan speeds 1 and 2.
Fan speed 3 with all its parameters and options is now non-functional.
Note
Further parameters and their setting options are described in Parameter window E, F, G: Fan (Multi-
level), p. 124.