ABB i-bus KNX - Page 203

ABB i-bus
®
KNX
Commissioning
FCA/S 1.x.x.1 | 2CDC508134D0202 201
Selection of option 1-byte [0...+255]:
Dependent parameters:
Send if threshold fallen below
[0...+255]
Send if threshold exceeded
[0...+255]
Options:
0...255
A value of 0 to 255 can be entered in single steps.
Min. duration of the undershoot
Min. duration of the overshoot
Options:
None
5/10/30/60 seconds
2/3/5/10/30/60 minutes
2/3/5/10/12/24 hours
 None: the threshold is sent directly.
With the further time options, a minimum duration can be selected. If the send condition reverts
during the minimum duration, no telegram is sent.