4 Repair
4.7.4. Replacement of motor, axis 6
3HAC026048-001 Revision: A168
© Copyright 2006-2008 ABB. All rights reserved.
8. Recalibrate the robot. Calibration is detailed in a
separate calibration manual,
enclosed with the calibration
tools.
General calibration information is
included in section Calibration
information on page 175.
9.
-
Danger!
Make sure all safety requirements are met when
performing the first test run. These are further
detailed in section DANGER - First test run may
cause injury or damage! on page 32.
Action Note
Continued
To Next Page
Loading...
