ABB REL670 2.2 IEC - Back-Up Protection Functions

IEC 61850 or
function name
ANSI Function description Line Distance
REL670 (Customized)
REL670 (A41) REL670 (A42) REL670 (B42)
REL670 (D42)
ZMRPDIS,
ZMRAPDIS
21 Distance measuring zone, quad
characteristic separate Ph-Ph
and Ph-E settings
0-5
FRPSPDIS 21 Phase selection, quadrilateral
characteristic with settable angle
0-2
ZMFPDIS 21 High speed distance protection,
quad and mho characteristic
0-2 1 1 1 1
ZMFCPDIS 21 High speed distance protection
for series comp. lines, quad and
mho characteristic
0-2
PPLPHIZ Phase preference logic 0-1
PPL2PHIZ Phase preference logic 0-1 1
ZMRPSB 68 Power swing detection 0-1 1 1 1 1
PSLPSCH Power swing logic 0-1 1 1 1 1
PSPPPAM 78 Poleslip/out-of-step protection 0-2 1-B24 1-B24 1-B24
OOSPPAM 78 Out-of-step protection 0-1 1 1 1
ZCVPSOF Automatic switch onto fault logic,
voltage and current based
1 1 1 1 1
2.3 Back-up protection functions
GUID-A8D0852F-807F-4442-8730-E44808E194F0 v13
IEC 61850 or
function name
ANSI Function description Line Distance
REL670 (Customized)
REL670 (A41) REL670 (A42) REL670 (B42)
REL670 (D42)
Current protection
PHPIOC 50 Instantaneous phase
overcurrent protection
0-3 1 1 1 1
OC4PTOC
51_67
1)
Directional phase overcurrent
protection, four steps
0-3 1 1 1 1
EFPIOC 50N Instantaneous residual
overcurrent protection
0-3 1 1 1 1
EF4PTOC 51N
67N
2)
Directional residual overcurrent
protection, four steps
0-3 1 1 1 1
Table continues on next page
Section 2 1MRK 506 369-UEN B
Application
44 Line distance protection REL670 2.2 IEC
Application manual