ABB REL670 2.2 IEC - IED Identifiers TERMINALID

Section 24 Basic IED functions
24.1 IED identifiers TERMINALID
IP15060-1 v2
24.1.1 Application
M15324-3 v6
IED identifiers (TERMINALID) function allows the user to identify the individual
IED in the system, not only in the substation, but in a whole region or a country.
Use only characters A-Z, a-z and 0-9 in station, object and unit
names.
24.2 Product information PRODINF
GUID-F67243CA-2429-4118-BBFF-3D62BF55E080 v2
24.2.1 Application
GUID-D78786E6-C34A-4E63-9D1E-0582C8F1F7E1 v9
Product information contains unchangeable data that uniquely identifies the IED.
Product information data is visible on the local HMI under Main menu/
Diagnostics/IED status/Product identifiers and under Main menu/
Diagnostics/IED Status/Identifiers:
Product information data is visible on the local HMI under Main menu/
Diagnostics/IED status/Product identifiers and under Main menu/
Diagnostics/IED Status/Identifiers.
• ProductVer
• ProductDef
• FirmwareVer
• SerialNo
• OrderingNo
• ProductionDate
• IEDProdType
Figure 424: IED summary
This information is very helpful when interacting with ABB product support (for
example during repair and maintenance).
1MRK 506 369-UEN B Section 24
Basic IED functions
Line distance protection REL670 2.2 IEC 855
Application manual