Function IEC 61850 IEC 60617 ANSI/C37.2-2008
Multipurpose protection MAPGAPC1 MAP (1) MAP-1
MAPGAPC2 MAP (2) MAP-2
MAPGAPC3 MAP (3) MAP-3
MAPGAPC4 MAP (4) MAP-4
MAPGAPC5 MAP (5) MAP-5
MAPGAPC6 MAP (6) MAP-6
MAPGAPC7 MAP (7) MAP-7
MAPGAPC8 MAP (8) MAP-8
MAPGAPC9 MAP (9) MAP-9
MAPGAPC10 MAP (10) MAP-10
MAPGAPC11 MAP (11) MAP-11
MAPGAPC12 MAP (12) MAP-12
MAPGAPC13 MAP (13) MAP-13
MAPGAPC14 MAP (14) MAP-14
MAPGAPC15 MAP (15) MAP-15
MAPGAPC16 MAP (16) MAP-16
MAPGAPC17 MAP (17) MAP-17
MAPGAPC18 MAP (18) MAP-18
Fault locator SCEFRFLO1 FLOC (1) 21FL-1
Loss of phase PHPTUC1 3I< (1) 37-1
High-impedance fault detection PHIZ1 HIF (1) HIZ-1
Underpower protection DUPPDPR1 P< (1) 32U-1
DUPPDPR2 P< (2) 32U-2
Reverse power/directional overpower
protection
DOPPDPR1 P>/Q> (1) 32R/32O-1
DOPPDPR2 P>/Q> (2) 32R/32O-2
Multifrequency admittance-based ground-
fault protection
MFADPSDE1 Io> ->Y (1) 67YN-1
Interconnection functions
Directional reactive power undervoltage
protection
DQPTUV1 Q> ->,3U< (1) 32Q-27
Low-voltage ride-through protection LVRTPTUV1 U<RT (1) 27RT-1
LVRTPTUV2 U<RT (2) 27RT-2
LVRTPTUV3 U<RT (3) 27RT-3
Voltage vector shift protection VVSPPAM1 VS (1) 78V-1
Power quality
Current total demand distortion CMHAI1 PQM3I (1) PQI-1
Table continues on next page
1MAC109016-MB C Section 1
Introduction
REF615 ANSI 11
Application Manual
To Next Page
Loading...
