ABB Relion 615 series - Optional Light Sensor Inputs

Terminal Description
X130:6 BI4, +
X130:7 BI5, +
X130:8 BI5, -
X130:8 BI6, -
X130:9 BI6, +
Binary inputs of slot X130 are optional for configurations F and N.
Table 52: Binary input terminals X130:1-8 with AIM0006 module
Terminal Description
X130:1 BI1, +
X130:2 BI1, -
X130:3 BI2, +
X130:4 BI2, -
X130:5 BI3, +
X130:6 BI3, -
X130:7 BI4, +
X130:8 BI4, -
Binary inputs of slot X130 are optional for configuration P.
Table 53: Binary input terminals X130:1-6 with AIM0007 module
Terminal
Description
X130:1 BI1, +
X130:2 BI1, -
X130:3 BI2, +
X130:4 BI2, -
X130:5 BI3, +
X130:6 BI3, -
5.1.4 Optional light sensor inputs
If the protection relay is provided with the optional communication module with light
sensor inputs, the pre-manufactured lens-sensor fibers are connected to inputs X13, X14
and X15. See the connection diagrams.For further information, see arc flash detector.
1MAC109016-MB C Section 5
Protection relay's physical connections
REF615 ANSI 205
Application Manual