ABB Relion 615 series - Default Disturbance Recorder Settings

Table 24: Default connections for LEDs
LED Default usage ID Label description
1 Circuit breaker close enabled LED_CBcloseenabled_1 CB close enabled
2 Overcurrent protection trip LED_Overcurrent_1 Overcurrent
3 Ground-fault protection trip LED_EarthFault_1 Ground-fault
4 Current unbalance protection
trip
LED_PhaseUnbalance_1 Phase unbalance
5 Sequence voltage protection
trip
LED_NPSOrPPSvoltage_1 Sequence voltage
6 Overvoltage or residual
overvoltage protection trip
LED_OVorResidualVoltage_1 OV / Residual voltage
7 Thermal overload alarm LED_ThermalOverload_1 Thermal overload
8 Undervoltage or frequency
protection trip
LED_UVorFrequency_1 UV / Frequency
9 Supervision alarm LED_Supervision_1 Supervision
10 Circuit breaker condition
monitoring alarm
LED_CBConditionMonitoring_
1
CB condition monitoring
11 - - -
3.5.2.2 Default disturbance recorder settings
Table 25: Default disturbance recorder analog channels
Channel
Description
1 IL1
2 IL2
3 IL3
4 Io
5 U1
6 U2
7 U3
8 -
9 -
10 -
11 -
12 -
Section 3 1MAC109016-MB C
REF615 standard configurations
102 REF615 ANSI
Application Manual